General Service $130 - A thorough check over of your bike.

Recommended every 3-6 months

- Wash bike
- Chain and chain-rings degreased on your bike

- Check drive-train for wear & align rear derailleur hanger
- Gears adjusted to run smoothly
- Lubricate chain, cables, derailleurs and brake pivots
- Disc rotors checked for wear & alignment
- Check brake pads for wear, replace if necessary

- Brakes adjusted for maximum power and feel
- Bike safety check; all bolts torqued, bearings checked for wear, and moving parts inspected, drivetrain wear measured

Extra Care $195 - Everything from the General Service plus...

Recommended every 9-12 months

- Cassette and chainrings/cranks removed and degreased in detail
- Remove bottom bracket bearings, flush with new grease
- Full headset bearing service, forks are removed
- Minor wheel true (on-bike)

Optional:

Add front & rear wheel bearing and freehub overhaul for $65

Road Rebuild Service $380 - Extra Care plus...

Recommended every 12-18 months, also includes a free follow up tune up.

- Complete strip down of bike to bare frame, clean and thorough inspection of all components
- Service/rebuild Bottom Bracket
- Service/rebuild Headset
- Service/rebuild derailleurs (where applicable)
- Service/rebuild brake callipers (where applicable)
- New MECHANICAL brake & gear cables throughout; Shimano/SRAM , Campagnolo*
- New handle bar tape*
- New tubes*

MTB Rebuild Service $470 - Extra Care plus...

Recommended every 12-18 months, also includes a free follow up tune up.

- Complete strip down of bike to bare frame, clean and thorough inspection of all components
- Dual suspension frames will have all bearings/bushes and pivots individually assessed and adjusted as per factory specifications.

- Replacement bearings & costs to be quoted.
- Suspension fork lowers removed, clean and check condition of seals and bushings, lubricant replaced
- Rear air suspension air can removed, clean and check condition of seals and bushings, lubricant
- Service/rebuild Bottom Bracket (Includes facing BB shell and cutting threads for standard)
- Service/rebuild Headset
- Service/rebuild derailleurs (where applicable)
- Service/rebuild pedals
- Brake fluid flush front and rear
- Disc pads checked and de-glazed
- Service/rebuild Hubs (new bearings for loose ball hubs)
- Wheels tensioned and trued front and rear
- New gear cables throughout (Shimano/SRAM)
- New tubes, or fresh sealant